After the Beep

Build your own.

You'll finish with a working machine on your desk and a number to give the people you love. No soldering.

1. Get the parts

The two main pieces

Arduino UNO R4 WiFi

The brain. WiFi and the red LED grid are built in.

It needs to be the WiFi model, not the plain R4 Minima.

16×2 LCD screen

Where your messages show up. Get one with its pins already attached.

Sold as LCD1602. Skip the kind with an extra little board on the back (I2C), which wires differently.

The small stuff

2. Wire it up

One wire at a time, with a quick check after each part. Keep the board unplugged unless a step says otherwise.

USB-CWiFiONARDUINOUNO R4 WiFiA5A4A3A2A1A0VINGNDGND5V3.3VRSTIOREF012345678910111213GNDAREFSDASCL+−aabbccddeeffgghhiijj3025201510515V+ rail

Move 1 of 29

Run a wire from the 5V pin to the + rail.

5Vto+ rail

The + rail is the line of holes along the red stripe at the top of the breadboard. Any hole on it works.

Run a wire from the 5V pin to the + rail. The + rail is the line of holes along the red stripe at the top of the breadboard. Any hole on it works.

See the finished wiring
USB-CWiFiONARDUINOUNO R4 WiFiA5A4A3A2A1A0VINGNDGND5V3.3VRSTIOREF012345678910111213GNDAREFSDASCL+−aabbccddeeffgghhiijjHello, machine!LCM1602C1VSS2VDD3V04RS5RW6E7D08D19D210D311D412D513D614D715A16KPREVNEXTSELECT302520151051
Tap a wire, a pin or a row to trace it.

3. Load the sketch

This part happens on a computer, in the free Arduino IDE.

  1. Install the Arduino IDE

    Download it from arduino.cc/en/software and open it.

  2. Add your board

    Open Tools › Board › Boards Manager, search UNO R4, and install Arduino UNO R4 Boards.

  3. Add two libraries

    Open Tools › Manage Libraries. Search for each of these and press Install:

    ArduinoJsonLiquidCrystal

  4. Open the sketch

    Download AnsweringMachine.ino and open it. If the IDE asks to put it in its own folder, say OK.

  5. Add your WiFi details

    Click the ⋯ button at the right end of the tabs, choose New Tab, and name it arduino_secrets.h. Paste this in, then replace the two highlighted parts with your WiFi's name and password.

    arduino_secrets.h
    // Stays on your computer. Don’t share it.#define SECRET_SSID "your-wifi-name"#define SECRET_PASS "your-wifi-password"#define SERVER_HOST "afterthebeep.vercel.app"// 1 if the red LED grid shows upside down#define FLIP_MATRIX 0

    Your password stays in that file on your computer and goes straight onto the board when you upload. This site never sees it. The board joins 2.4 GHz WiFi only.

  6. Upload it

    Plug in the board, pick Arduino UNO R4 WiFi from the board menu at the top, and press Upload →. After a minute the screen says it's connecting, then shows a pair code.

4. Pair it and share your number

Open your inbox and type in the pair code from the screen. Your machine gets its own phone number, so give it to someone who'd love to surprise you.

To pair the board with a different account later, hold SELECT while plugging it in.

Something not right?

Pick what your machine is doing.